5.
Press
e
to complete the transfer.
The frequency is now stored in the new
channel, and the old channel is empty.
6.
To cancel the transfer before it’s complete, press either
N
or
m
.
Duplicate Frequency Alert
If you enter a frequency which is stored in
another channel, you hear a beep and the
other channel displays.
Press
.
to start again
— or—
Press
e
again to store the frequency in
both channels.
Deleting a Stored Frequency
To delete a stored frequency:
a. Press
0
.
b. Then press
e
.
Channels with no frequencies are
automatically locked out.
Preventing Accidental Programming
You can prevent the accidental programming of your scanner by setting the Lock feature. To
prevent the programming of your scanner, follow these steps:
1.
Set the switch labeled ENTER LOCK on the
rear panel of your scanner to the ON
position.
2.
When lock is set, the
e
and
U
keys
are disabled. If these keys are pressed,
an error message flashes for two
seconds, and your scanner resets.
3.
To return to normal operation, set the
switch to the OFF position.
SCAN
MANUAL
PRI TRUNK DATA
L/O
DELAY
CTCSS
1
2
4
7
5
8
3
6
9
E
a
b
0
20
