User manual for NERO / NERO INSTANT
Page 64
Version 3.2 / December 2017
5.0 WORKING WITH USB FlASH DRIVE
The machine’s Regulator allows Machine’s configuration, software updates and data recovery by ex
-
changing files using a USB drive (flash drive).
The drive must be connected to the USB connector, which is situated on the inner side of the vending
machine’s door (see figure 34).
The USB must be connected while in sales mode. When you connect the USB drive the Machine’s
display will show relevant information about the drive.
Information that can be read on the USB-flash drive with the machine:
•
Statistical data (Audit): Information about the Machine’s operations, sales, equipment functioning and
logs.
Stored in a file format EVA-DTS, file name:Axxmmddi.DTS.
If the Machine’s clock’s not working
the file name will be Axx_i.DTS.
- хх =
last two digits of the serial number, set in clause 1.1.2 of the Technician’s menu
- mm = Month (if date and time are set for the Machine)
- dd = Day (if date and time are set)
- i = digit from 0 to 9. You can save up to 10 files with different names in 24 hours.
It is necessary to insert the USD-flash drive into the USB connector to access the information on the
drive. The USD connector is situated on the inner side of the vending machine’s door (see section 3.5.13).
This connection should be made when the machine is in selling mode and when asked confirm the follow
-
ing: “Save audit?”
•
The current configuration:
File format EVA-DTS. File name: Cxxxxxxx.DTS, C then the 7-digit serial
number of the machine, specified in clause 1.1.2 of
he Technician’s menu (for example: C0000123.
DTS).
This file contains equipment configuration information, as well as information about the names, place
-
ments and prices of products.
It is necessary to insert the USD-flash drive into the USB connector to access the information on the
drive. The USD connector is situated on the inner side of the vending machine’s door (see section 3.5.13).
This connection should be made when the machine is in selling mode and when asked confirm the follow
-
ing: “
Write configuration?
”
Information that can be downloaded from the USB-flash drive into the machine:
•
Configuration of a certain Machine:
File format EVA-DTS. File name: Cxxxxxxx.DTS, C then the 7-digit
serial number of the machine, specified in clause 1.1.2 of he Technician’s menu. The file will be loaded
into the machine only when the coincidence of numbers specified in clause 1.1.2 and in the file name.
This allows you to load from one USB-flash drive different configurations for different machines.
It is necessary to insert the USD-flash drive into the USB connector to access the information on the drive. The
USD connector is situated on the inner side of the vending machine’s door (see section 3.5.13). This connection
should be made when the machine is in selling mode and when asked confirm the following: “Load configuration?
”
ATTENTION! To work with the machine is only suitable USB-flash drives! Disk drives and flash
drives are not supported. Supports USB-flash drives with FAT16 or FAT32. Other file systems (in
-
cluding NTFS) not supported.