Unicum NERO User Manual Download Page 46

User manual for NERO / NERO INSTANT

Page 43

Version 3.2 / December 2017

ТМ

  4.1.4 Menu item ‘‘1.4 CASH REGISTER’’

  Menu item “1.4 Cash register” is not used for vending machine of type “NERO”. 

  4.1.3 Menu item ‘‘1.3 TIME INTERVAlS’’

  Menu item “1.3 Time intervals” determines time intervals during which a product can be sold through 

the vending machine at a discount, be available for sale or blocked as per the parameters (discounted 

products, blocking of cell) presented in clause “1.6 Price”.

  The Machine can handle 7 time intervals. each interval has its own end time. 

  The start time of an interval coincides with the end time of the previous interval. 

  The start time for an interval is set at the ned of the previous interval or at 00:00:00. 

Sub-menu

Description

Value

1.3 Time zones

Configuration of time intervals (see above)

1.3.1 Time zone 1

Configuration of time for interval 1

Enter time

1.3.2 Time zone 2

Configuration of time for interval 2

Enter time

1.3.3 Time zone 3

Configuration of time for interval 3

Enter time

1.3.4 Time zone 4

Configuration of time for interval 4

Enter time

1.3.5 Time zone 5

Configuration of time for interval 5

Enter time

1.3.6 Time zone 6

Configuration of time for interval 6

Enter time

Example:

Interval 1 - 10:00:00

Interval 2 - 18:30:00

Intervals 3,4,5,6 - 00:00:00

The machine will function during three time intervals from 00:00:00 to 10:00:00 – interval 1, then from 10:00:01 till 
18:30:00 – interval 2 and Interval 3 from 18:30:01 to 00:00:00.

Summary of Contents for NERO











































































Reviews: