32
EN
1. DIGITAL DISPLAY area:
This area will show the temperature and, if in the TIMER mode, will show the ON and OFF settings
of the TIMER. It will automatically revert back to show the temperature after 5 seconds. Under "FAN" operation mode, nothing is
shown in this area.
2. TRANSMISSION Indicator:
This indicator flashes once when remote controller transmits signals to the indoor unit.
3.
ON/OFF Indicator:
This symbol appears when the unit is turned on by the remote controller, and disappears when the. unit is
turned off.
4.
OPERATION MODE Indicator:
Shows the current operation modes-"AUTO", "COOL", "DRY", "HEAT" and "FAN". HEAT only
available for heat pump model.
5.
FAN SPEED Indicator:
Press the FAN SPEED button to select the desired fan speed setting (Auto-Low-Med-High). Your selec-
tion will be displayed in the LCD window except the Auto fan speed.
6.
LOCK Indicator:
This symbol appears when press the LOCK button, and disappears when press it again.
7.
TIMER ON/OFF Display:
This display area shows the settings of TIMER. That is, if only the starting time of operation is set, it
will display the TIMER ON. If only the turning off time of operation is set, it will display the TIMER OFF. If both operations are set, it
will show TIMER ON/OFF which indicates you have chosen to set both the starting time and off time.
NOTE:
All signs shown in the Fig.2 is for the purpose of clear presentation. But during the actual operation only the relative functional
items are shown on the display panel.
- INSTALL/REPLACE BATTERIES
The Remote Controller uses two alkaline dry batteries (LR03X2).
1. To install the batteries, slide the back cover of the battery compartment and install the batteries according the direction (+and -)
shown on the Remote Controller.
2. To replace the old batteries, use the same method as mentioned above.
- AUTOMATIC OPERATION
When the Air Conditioner is ready for use, switch on the power and the OPERATION indicator lamp on the display panel of the
indoor unit starts flashing.
1. Use the MODE .select button to select AUTO.
2. Push the TEMP button to set the desired room temperature. The most comfortable temperature setting are between 21°C to 28°C.
3. Push the ON/OFF button to start the air conditioner. The OPE RATION lamp on the display panel of the indoor unit lights. The
operating mode is AUTO FAN SPEED is automatically set and there are no indicators shown on the display panel of the remote
controller.
4. Push the ON/OFF button again to stop the unit operation.
NOTE:
1. In the AUTO mode, the air conditioner can logically choose the mode of COOL, FAN, HEAT and DRY by sensing the difference
between the actual ambient room temperature and the set temperature on the remote controller.
2. If the AUTO mode is not comfortable for you, the desired mode can be selected manually.
- COOL/ HEAT (Cooling only model without) and FAN ONLY Operation
1. If the AUTO mode is not comfortable, you may manually over ride the settings by using COOL, HEAT or FAN ONLY modes.
2. Push the TEMP button to set the desired room temperature. When in COOL mode, the most comfortable settings are 21°C or
above. When in HEAT mode, the most comfortable settings are 28°C or below.
3. Push the FAN SPEED to select the FAN mode of AUTO, HIGH, MED or LOW.
4. Push the ON/OFF button, the operation lamp lights and the air conditioner start to operate as your setting. Push the ON/OFF
button again to stop this unit operation.
NOTE
: The FAN ONLY mode can not be used to control the temperature. While in this mode, only steps 1, 3 and 4 may be performed.
2. REMOTE CONTROL
2.1. R01 - Display
Summary of Contents for PS09 18HI
Page 70: ......
