20
Display
top
MEANING
Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Display
bottom
ON1/OFF1-Yes or No
ON2/OFF2-Yes or No
ON3/OFF3-Yes or No
ON4/OFF4-Yes or No
ON5/OFF5-Yes or No
ON6/OFF6-Yes or No
ON7/OFF7-Yes or No
In the example below, the heat stove is lit on
Saturday and Sunday only.
Confirm and continue with button
.
Day 1
Monday
off 1
Day 2
Tuesday
Day 3
Wednesday
Day 2
Thursday
Day 2
Friday
Day 2
Saturday
Day 2
Sunday
off 2
off 3
off 4
off 5
on 6
on 7
UT08 UT16
continue as above to set the second, third and
fourth ignition.
In case the stove is controlled by external ther-
mostat, when the thermostat reaches the pre-
set temperature, the heat stove display will read
“ECo TERM”
.
The room thermostat does not imple-
ment the function of cycling the heat
stove on and off, but sets it to saving
mode.
with buttons and , with 10-minute steps.
Press button to move to the next parameter.
UT07: Select days of the week
Press the button to select the days of the
week, whereas by pressing button you enable
(ON) or disable (OFF) the heat stove ignition day
as shown in the following table:
Chronothermostat
Remote control
The remote control is used to adjust water
temperature, power and heat stove ignition/
extinction.
To replace the 3 volt
battery (CR 2025),
located at the rear of
the remote control,
prise the cover open
with a screwdriver,
replace the battery
complying with its
polarity.
Press key to ignite the heat stove, the heat
stove automatically enters the start up stage.
Press keys
and
to adjust water
temperature, while use keys
and
to
adjust operation power.
To switch off the heat stove press key
; the
heat stove display will read
“OFF”.
