UNI-T UTG1000X Series, Programming Manual

Page: 7 / 51

Programming Manual UTG1000X Series
Instruments.uni-trend.com
7 / 51

Description
A separator of number forma for the system.

Return Format
The query returns separator in system number format.

For Example
:SYSTem:NUMBer:FORMat NONe
Set the number format of the system to NONe.
:SYSTem:NUMBer:FORMat? The query returns NONe.
:SYSTem:BRIGhtness

Syntax
:SYSTem:BRIGhtness
{10|30|50|70|90|100}
:SYSTem:BRIGhtness?

Description
The backlight brightness level of the system.

Return Format
The query returns the backlight brightness level of the system.

For Example
:SYSTem:BRIGhtness 30
Set the backlight brightness level to 30%.
:SYSTem:BRIGhtness? The query returns 30.
:SYSTem:SLEEP:TIMe

Syntax
: SYSTem:SLEEP:TIMe {CLOSe| 1MIN | 5MIN | 15MIN | 30MIN | 60MIN}
:SYSTem:SLEEP:TIMe?

Description
The sleep time of the system, the unit is minute.

Return Format
The query returns the sleep time.

For Example
:SYSTem:SLEEP:TIMe 5 MIN
Set the sleep time to 5MIN.
:SYSTem:SLEEP:TIMe? The query returns 5MIN.
:SYSTem:CYMometer

Syntax
:SYSTem:CYMometer {{1 | ON} | {0 | OFF}}
:SYSTem:CYMometer?

Description
Control the switch status of system’s frequency meter.
Notice: If this function is enabled, channel’s sync output will be turned off.

Return Format
The query returns the switch status of system’s frequency meter. 0 represents OFF, 1 represents ON.

For Example
:SYSTem:CYMometer ON
Turn on system’s frequency meter.