Index
Table of Contents
4.
Grasp the new processor module by the edges and gen-
tly place it in the processor socket, seating its pins in
the socket pin holes.
You may need to slowly move the processor module back and forth
until the pins align with the socket pin holes.
5.
Press firmly on the processor module, applying even
pressure.
6.
Lower the lever above the processor module to a hori-
zontal position until the lever snaps into place.
7.
Reinstall the PCI cards
and replace the cover.
Your processor upgrade is autoconfiguring during startup.
Upgrading the Cache Memory Module
The SuperMac C500 includes a factory-installed cache memory mod-
ule. You can upgrade your system by installing a 512K or 1 MB mod-
ule. The new module must be designed for the Apple Power Macintosh
6400, or the SuperMac C500 and C600 series computers.
To install a cache memory module:
To access the cache memory module, you must first remove the floppy
disk drive.
1.
Remove the cover from the computer.
See “Installing an Expansion Card” earlier in this appendix.
2.
Remove the front panel.
