Index
Table of Contents
Setting Up Your SuperMac C500 Computer
The diagram below illustrates the components you need to set up your
SuperMac C500. Carefully read and follow all the setup instructions
in this chapter as you connect your SuperMac C500 and other compo-
nents.You must use shielded interface cables to comply with FCC
requirements for radio-frequency interference. (All cables provided
with your SuperMac C500 are properly shielded .)
Connecting the Power Cable
Always make sure that your SuperMac C500 computer is plugged into
a grounded AC power outlet before you connect a component to it. This
properly grounds the computer.
To connect the power cord to your SuperMac C500:
1.
Place the computer where you want it.
If your computer came with a modem, you may want to set your
computer near a phone jack so that you can connect the modem
later.
Mouse
SuperMac C500
Power and ADB cables for SuperMac C500 are included. Video and power cables for
your display should be included with the display.
Keyboard
Display
Power cable
Power cable
(sold separately)
Speakers
(optional)