Ultratec Supercom 4400, User Manual

Page: 11 / 96

All you need to do to set up the Supercom 4400 is plug it in! You
have to plug in the AC adapter for 24 hours to charge the batteries.
The ring flasher will not work properly until the batteries are fully
charged. After that, leave the AC adapter plugged in all the time
unless you need to use the batteries during a power outage or while
traveling.
The best way to use the Supercom 4400 is to plug in a telephone
line. This is called direct connect. But if you cannot plug in a
telephone line, you can also make or answer calls by putting a
telephone handset in the Supercom 4400 acoustic cups.
Plugging in power and a telephone line p. 10
About the control key p. 12
About Auto ID
™
p. 12
Supercom 4400 function keys p. 14
Ctrl
S E T U P • 9
C H A P T E R
1
SETUP