Ultratec Supercom 4400 User Manual Download Page 68

Page: 68 / 96

Press the

key. You will see RELAY VOICE SAVED

briefly displayed.

Press the

key to leave options.

Turning off Turbo Code

Follow these steps to turn off Turbo Code:

Press the options key (

). You will see PRINT

(UP/LOW) CASE on the display.

Press the

key until you see TURBO CODE (ON) on the

display.

Press the

to change the setting to OFF.

Press the

key to save the setting and leave options or press

the

key to save the setting and go to the next option.

Turning on E-Turbo

Note:

This option will not be displayed if Turbo Code is off.

Follow these steps to turn on E-Turbo.

Press the options key (

). You will see PRINT

(UP/LOW) CASE on the display.

Press the

key until you see ETURBO (OFF) displayed.

Press the

to change the setting to ON.

Press the

key to save the setting and leave options or press

the

key to save the setting and go to the next option.

Return

Esc

Spacebar

Return

Ctrl

Ctrl

Return

Esc

Spacebar

Return

Ctrl

Ctrl

Esc

Return

6 6 • O P T I O N S

Summary of Contents for Supercom 4400

































































































Search results

Summary of Contents for Supercom 4400

Reviews:

Related manuals for Supercom 4400

Brands by name

Popular brands

Ultratec Supercom 4400, User Manual

Search results

Summary of Contents for Supercom 4400

Reviews:

Related manuals for Supercom 4400

Brands by name

Popular brands