Ultratec Supercom 4400, User Manual

Page: 40 / 96

Auto busy redial + +
When a number is busy, the Supercom 4400 can redial the number
by itself up to 30 times. It will let you know when it makes a
connection by flashing the ring flasher. You must be using direct
connect to use this feature. Follow these steps to turn on auto busy
redial:
1.
Dial a number. If the number is busy, the display says BUSY.
2.
Hold down the key and the key and press the
key ( + + ). The display says AUTO REDIAL 01.
The Supercom 4400 will redial each minute. The display
shows how many times the Supercom 4400 has redialed.
3.
The ring flasher flashes when the line is ringing. When you see
an answer message on the display, type a greeting.
Press the key to stop auto busy redial.
Change to other TTY + +
If you want to change TTYs in the middle of a conversation, you
can put the call on hold, go to another TTY, and tell the Supercom
4400 to hang up. You must be using direct connect to use this
feature. Follow these steps to use the change to other TTY feature.
1.
Hold down the and keys and press the key
( + + ) to put the call on hold. Leave the Supercom
4400 on.
2. Go to another TTY connected to the same telephone line
(either direct connect or acoustic), turn it on and type three
periods. The Supercom 4400 will hang up.
3.
Continue your conversation from the second TTY.
Note:
This feature is useful for changing telephone extensions in
your home. It is not meant to be used to transfer calls in an office.
For information about transferring calls in an office, see
Transferring
a call on page 40.
C Shift Ctrl
C Shift Ctrl
C Shift Ctrl
Esc
Return Shift Ctrl
Return Shift Ctrl
Return Shift Ctrl
3 8 • A DVA N C E D C A L L I N G