Ultratec Supercom 4400, User Manual

Page: 37 / 96

Programming E-Turbo relay preferences
+
Note:
You must turn E-Turbo on before you can program your user
preferences.
When E-Turbo is enabled, your Supercom 4400 will automatically
use your relay preferences to set up the call with the CA.
1. Press the options key (hold down the key and press the
key).
2.
Press the key until you see RELAY PREFS displayed,
plus the letter(s) of any preferences that have been
programmed.
3. Type the letter(s) of the relevant setting from the following
chart. You can select as many preferences as you want.
Available User Preference Settings:
D
Do not dial through
Z
Do not type recordings verbatim
V
VCO on
H
HCO on
M
Male CA
F
Female CA
B
Braille
A
Do not announce Relay
X
Do not explain Relay
C
Request calling card
E
English language
G
German language
R
French language
S
Spanish language
2
2-line VCO
For example: If VCO will be used when placing calls through
Relay and you prefer to explain relay yourself, type the letters
"VX" in this menu. Then, the TRS will recognize calls as
being VCO calls and will not explain relay.
Use the
key to correct mistakes or to remove
previously programmed preferences.
Back Space
Return
9 Ctrl
9 Ctrl
A DVA N C E D C A L L I N G • 3 5