Chapter 6: Peripherals and Accessories
00.053.205, Revision A SonixMDP/SP/OP Service Manual
6-8
6.6.2
Method 2: Via the TV’s PC IN Connector
Search the TV manufacturer's user guide to determine whether or not the TV’s
PC IN
connector will accept the
required signal format.
Table 6-5: Required Signal Format
Determine the type of connector required by the TV’s
PC IN
connector in order to source the correct cable:
• DVI connection > DVI to DVI cable
• HDMI connection > HDMI to DVI cable.
To Connect the TV via PC IN with a DVI Cable:
1.
With both the TV and the system powered off, connect one end of the DVI cable to
DVI
on the system’s Back
Connectivity Panel.
2.
Connect the other end of the DVI cable to
PC In
on the TV.
3.
Ensure the TV is plugged in.
4.
Power on the TV.
5.
Power on the system.
6.
If necessary, once there is an image on the TV, configure the TV aspect ratio setting to
4:3
(not
16:9
).
To Connect the TV via PC IN with an HDMI to DVI Cable:
1.
With both the TV and the system powered off, connect the DVI end of the cable to
DVI
on the system’s Back
Connectivity Panel.
2.
Connect the HDMI end of the cable to
PC In
on the TV.
3.
Ensure the TV is plugged in.
4.
Power on the TV.
5.
Power on the system.
6.
If necessary, once there is an image on the TV, configure the TV aspect ratio setting to
4:3
(not
16:9
).
Format Resolution
V.
Frequency
XGA
1024 x 768
60 Hz
Summary of Contents for Sonix MDP
