Ultrasonic UP3218, Operator And Maintenance Manual

Page: 42 / 272

Property of Ultrasonic Power Corporation -
© 2018
Publication #181114
42
1. Specifications
39-Gallon Console with Filtration, Weir and Sparger
Overall Width
23”
Overall Length
57”
Overall Height
40”
Tank Width
18”
Tank Length
32”
Tank Depth
16”
Working Depth
14”
Total Volume of Liquid 39 Gallons (Optimum)
Working Volume 35 Gallons
Weir Volume 4 Gallons
Weight (Empty)*** 170 Pounds
Electrical Supply
Requirements
230V/240V-1P
50/60 Hz
Total Amperage 17 A
Ultrasonic Power (Average) 1500 Watts
Operating Frequency 40 kHz
Heater Power 2000 Watts
Estimated Heat Up Time* 3.3 Hours
Maximum dB level 86 dB
Maximum Operating Temperature** 180°F
(*) 70°F-140°F change of temperature with stainless steel lid on machine. Heat up times can be
shortened by up to 30 minutes by turning on the ultrasonics at 100% intensity.
(**) System will turn off if operated above 180˚F, liquid overtemp indicator will be on. When system
reaches below the pre-set (Pre-
set at 180˚F) temperature, indicator will be turned off.
(***) Approximate weight. Subject to change. Not the same as shipping weight.
Fuse Schedule*
F1 Control Circuit Fuse 250V / 1A / FLM
F2 Control Circuit Fuse 250V / 1A / FLM
F3 Ultrasonic Generator Fuse 250V / 10A / FLM
F4 Ultrasonic Generator Fuse 250V / 10A / FLM
F5 Heater Fuse 250V / 10A / FLM
F6 Heater Fuse 250V / 10A / FLM
F7 Pump Fuse 250V / 2A / FLM
F8 Pump Fuse 250V / 2A / FLM
F9 Oil Skimmer Fuse 250V / 1A / FLM
F10 Oil Skimmer Fuse 250V / 1A / FLM
(*) Only trained personnel, not the operator, should replace the fuses
(**) All fuses are slo-blow time delay