Ultrasonic UP3218, Operator And Maintenance Manual

Page: 255 / 272

Property of Ultrasonic Power Corporation -
© 2018
Publication #181114
255
4.4. Troubleshooting Table
Only trained personnel are allowed into the inside of the machine.
PROBLEM ITEMS TO CHECK*
1. System does not receive
power when "
Main Power"
switch is turned to "ON" position.
a. Unit Power Cord
b. Building Power Supply
c. Unit’s Fuses
d. Loose/ disconnected wires
e. Switches
PROBLEM
ITEMS TO CHECK*
2. The Ultrasonics do not work.
a. Building Power Supply
b. Unit’s Fuses
c. Loose/ disconnected wires. Broken wires may result in changes to
the transducer capacitance
d. Capacitance of BNC Connector to Generator is at least 20 nF.
e. Switches and Settings
PROBLEM
ITEMS TO CHECK*
3. The Heater does not work.
a. Building Power Supply
b. Unit’s Fuses
c. Loose/ disconnected wires
d. Amperage
is near 4.1A per 1000W’s
e. Switches and Settings
PROBLEM
ITEMS TO CHECK*
4. The Pump does not work.
a. Flow Control Valves Near Filter
b. Purge Valve
c. Unit’s Fuses
d. Loose Housings
e. Switches and Settings
PROBLEM
ITEMS TO CHECK*
6. Sparger-Weir System does not
work.
a. Bypass Valve Configuration
b. Drain, Purge, and Flow Control Valves
c. Clogged Sparger Bar
d. Loose Housings
e. Adjustable Oil Skimmer Belt Tensioner
(*) Where applicable, the component schematic for a console model follows the component description.
If the problem has not been solved using the trouble shooting guide, call the Ultrasonic
Power Corporation service department at (815) 235-6020 7:00 AM - 3:30 PM CST Monday -
Friday.