Ultraframe Classiclantern, Fabrication Manual

Page: 8 / 20

Drill with 9mm drill bit
through holes shown for rider
rail prep.
Eaves End
LANHDJ - Lantern
Hip Drill Jig
Eaves End
Holes should be in
line with V groove
150
Eaves End
Holes should be in
line with V groove
Hip fixing at rider rail prep
When the hip bars meet the rider rail they are secured with bolts located in the bolt slot of
the rider rail.
Use jig LANHDJ to accurately drill the rider rail mounting hole positions in the appropriate
hip bar (specified in paperwork).
8