3.50
CENTRE POSITION AS SPECIFIED
JRKA004/1
Hip Prep for Jack Rafters
If jack rafters are present on the roof, the hip bars will require fixing holes to accept the
jack rafter brackets in the desired locations on the roof.
1.
Looking at the hip bars in the roof fabrication report, take the centre position shown and
mark on the hip bar as specified.
2.
Place the jack rafter hip bracket onto the bar and align the centre with the mark.
3.
Drill two 3.5mm holes through the holes on the jack rafter bracket.
4.
Using the fixings provided (JRKA004/1) securly fix the jack rafter bracket in place.
12
Summary of Contents for Classiclantern
Page 1: ...1 V1 January 2020 CLASSIC 20 LANTERN FABRICATION GUIDE...
Page 18: ...4 Notes...
Page 19: ...5 Notes...
