Ultraframe Classiclantern, Fabrication Manual

Page: 7 / 20

GBCB
RS4806
GBCB
RS4805
SLADJ001
17
44.79
Hip fixing at ridge prep
The hip bars are connected to the ridge body using the ridgeLOCK connectors. These
connectors need to be pre fitted to the hip bars. In order to prepare for the ridgeLOCK
components, the hip bars first need to be pre-drilled.
Use the speedlock glazing bar jig (SLADJ001) to accurately drill (using a 4.5mm drill bit)
the mounting holes for the ridgeLOCK components.
Fit the ridgeLOCK (RS4805/RS4086) into the end of the pre drilled hip bar and secure in
place using EBT001 (M5 x 12) screw in the upper hole and RS3823 (M5 x 20) screw in the
lower hole.
Note: The ridgeLOCK components are handed and are indicated on the component
itself. Ensure that the correct part is fitted to either the LH or RH bar.
EBT001
RS3823
4.5mm holes
7