Ultraframe Classiclantern, Fabrication Manual

Page: 9 / 20

24
23
9
Drill with 9mm drill bit
through holes shown for the
ridge prep.
RIDGE END
9 23
105
Drill with 9mm drill bit
through holes shown for the
rider rail prep.
EAVES END
Transom fixing at ridge prep
On larger lanterns, transoms going to the ridge may be specified. These are fixed with
twin bolts slotted into the ridge body and the rider rail bolt slot.
Mark the hole positions shown below then drill using 9mm drill bit.
Transom fixing at rider rail prep
Mark the hole positions shown below, then accurately drill the rider rail mounting hole
positions using a 9mm drill bit.
9