Ultraframe Classiclantern, Fabrication Manual

Page: 14 / 20

LVCC001
AGS250
4719C60
4719MGR60
4719SBL60
Q8221 4720M60
Q8053/6 Q8159/6
1
1
2
2
3
4
4
1
Lantern Ridge
Assembly
The Classic Lantern ridge is a two part assembly consisting of a ridge body with a clip on
ridge top cap. The ridge is fixed at 20° and has bolt slots to accommodate bar meeting at
the ridge.
Cutting the lantern ridge components
1. Working from the roof plan supplied in the software fabrication report, cut the ridge
4720M60 and ridge top cap 4719 to the specified length indicated in the cutting list.
2. Looking at the cutting list, cut the ridge wing claddings Q8159/6 and the ridge
undercladding Q8053/6 to the same length as the ridge and top cap.
3. Insert the ridge body gasket Q8221 into the channels on either side of the ridge. This
gasket should be the same length as the ridge body.
4. Slide on both wing claddings Q8159/6 followed by the undercladding Q8053/6 onto the
ridge body.
14