LED TRONICS SLL003P 400 04 Series, Installation Instructions

Page: 1 / 3

www
.
LED
tronic
s
.c
om
SLL003P-400-xxx-x04
SLL003P-800-xxx-x04
SLL003P-35X2W-xxx-005
SLL003P-70X2W-xxx-005 SLL003P-4X60W-xxx-005
Installation
Instructions
PACKAGE INCLUDES: Lum Installation Instru Mounting Brackets (packed separately)
®
© 2010 LEDtronics, Inc.
23105 Kashiwa Court, Torrance, CA 90505
Phone: (800) 579.4875 / (310) 534.1505
Fax: (310) 534.1424
E-mail: webmaster@ledtronics.com
Website: http://www.ledtronics.com
LED TRONICS, INC. ®
THE FUTURE OF LIGHT
9001:2000 ISO
CERTIFIED by DNV
READ AND FOLLOW ALL PRECAUTIONS AND INSTALLATION INSTRUCTIONS PRIOR TO INSTALLING LUMINAIRE
LED TRONICS, INC. ®
THE FUTURE OF LIGHT
I
mportant
S
afety
I
nstructions
CAUTION
■
– RISK OF ELECTRIC SHOCK.
Suitable for wet or damp locations.
To prevent wiring damage or abrasion,
■
do not expose wiring to edges of sheet
metal or other sharp objects.
CAUTION – RISK OF FIRE.
■
This product must be installed in
accordance with the applicable
installation code by a person familiar
with the construction and operation of
the product and the hazards involved.
Consult a qualified electrician to ensure
■
correct branch circuit conductor.
Save these instructions and deliver to
■
owner after installation.
No user-serviceable parts inside.
■
INSTR-SLL003P
-0001-E / R
ev
. 02/2011
REMOVE PARTS
1.
 Remove 4 screws from the lens cover
to remove it from the back enclosure
(Figure 1).
 Remove 4 screws to take out cluster
assembly from back enclosure (Figure 2).
KNOCK OUT / DRILL
2.
Use provided knockouts for mounting
or drill holes into back enclosure as
necessary.
MOUNTING
 Line up the back enclosure in the
desired location.
 Mount securely with the customer-
provided screws.
REASSEMBLE LUMINAIRE
3.
 Use 4 screws to reinstall the cluster
assembly to the back enclosure (Figure
1).
 Use 4 screws to attach the lens cover
to the back enclosure (Figure 2).
Flush Mount Installation
HAVE NEEDED ITEMS HANDY:
1.
⊙
Phillips screwdriver
⊙
Slotted screwdriver
⊙
Wrench
⊙
Sealing material (wet
locations)
⊙
Wire cutter/Strippers
⊙
Twist-on wire connector (Wire
nuts)
BRACKET OR FLUSH MOUNT
2.

To install the bracket, follow
the specific bracket installation
instructions on pp. 2-3, and
return to these instructions for
wiring.

To install by flush mount,
follow the specific installation
instructions below, and return to
these instructions for wiring.
3.
WIRING

Ensure all power is OFF before
proceeding with wiring.

If needed, strip supply wires.

Use customer-provided
twist-on wire connectors (wire
nuts) for connection of supply
wires to luminaire wires. Connect
the black wire from fixture to the
appropriate black supply wire
(hot). Connect the white wire
from fixture to the white supply
wire (common). Attach the
ground supply wire to the green
ground wire.

Dress wires away from sharp
edges.
For wet locations, install to avoid
4.
water entering or accumulating
in wiring compartments or other
electrical parts. Use sealing
material as needed.
Turn power on.
5.
Figur
e 2
SCREW
WASHER
(4 PLCS)
On Both
Sides
CLUSTER
ASSEMBLY
Figur
e 1
WASHER
LENS COVER
#10-32 x 1” SCREW
1 SCREW
AT EACH
CORNER
O-RING
SEALING
WASHER