PAGE 3
INSTALL GUIDE
- Installation and Owner Manuals - Control Module
- Multi-Tone Siren - Window Decal
- One 2way Transmitter (660/670 series)
- One 3 Button FM 1way Transmitter (670 series)
- Two 4 Button AM 1way Transmitters (640 series, Only 1 with 660 series)
- Two 6 Button AM 1way Transmitter (606 series)
- Antenna With Integrated LEDs and Program/Valet Switch
- 13 Pin Main Harness - 4 pin Aux Sensor Harness
- 4 Pin Keyless Entry Harness With Driver’s Door Priority Output
- Starter Disable Harness
Components
ACTIVATING SERVICE MODE:
While the ignition is “ON” press and hold the Program Button (located on
the antenna) for 5 seconds. The park lights will flash and the siren will chirp
five times to confirm that the system is in Service Mode.
NOTE:
While in Service Mode the LEDs will be “ON” steady. Door locks
and trunk release are still operational.
DEACTIVATING SERVICE MODE:
While the ignition is “ON” press and hold the Program Button (located on
the antenna for 5 seconds. The park lights will flash and the siren will chirp
two times to confirm that the system has exited Service Mode.
NOTE:
All Alarm Functions are reactivated.
System Service Mode (Valet)
This feature will disable the system except for lock, unlock and trunk
functions. This mode is used if a remote is misplaced, damaged or if
the system malfunctions. If the system was installed with a starter
disable this feature will disable the starter disable relay and allow the
vehicle to start.
This Manual Covers the Following Series:
640 / 606 / 660 / 670
