1
RF-303 OPERATION INSTRUCTIONS
A. REMOTE CONTROL TRANSMITTER OPERATION
The remote control transmitters (XT-56 ) included with the RF-303 offer the
code rolling feature which will prevent illegal use of a code-grabber with an
attempt to record the code of your transmitter.
1. ARM/DISARM
TO ARM THE RF-303
Press the ON/OFF button once to
arm. The vehicle horn or siren will
chirp one (1) time, the parking lights
will flash one (1) time, and all doors
will lock (**).
TO DISARM THE RF-303
Press the ON/OFF button once to
disarm. The vehicle horn or siren
will chirp two (2) times, the parking
lights will flash two (2) times, and all
doors will unlock (**).
NOTE (*)
The RF-303 is designed to honk the vehicle’s factory horn on alarm
arm/disarm, and during actual alarm trigger, or the included electronic siren can
be installed by your AutoPage Authorized Dealer to take the place of the audible
horn signal.
NOTE (**)
Your vehicle must be equipped with power door locks. Optional
relays may be required. The door lock/unlock outputs of the RF-303 are not
ON/OFF
AUX
