PAGE 13
INSTALL GUIDE
Anti Car Jacking Mode
ACTIVATING CAR JACK MODE
Program Menu 2, Setting 5
Type 1-
Car Jack Mode will activate if the door is opened while the ignition key
is in the “On” position. Car Jack Mode may also be activated by
pressing the # button on the remote transmitter while the ignition key is
in the “On” position.
Type 2-
Car Jack Mode will activate if the ignition key is turned to the “On”
position. Car Jack Mode may also be activated by pressing the #
button on the remote transmitter while the ignition key is in the “On”
position.
DEACTIVATING CAR JACK MODE
1.
During the Countdown
Mode
- Turn the ignition key “
ON
” then press and
release the Program Button one time.
2.
After Full Alarm
- Turn the ignition key
“Off” then “ON”
then press and
hold the Program Button until the alarm turns off. (About Eight seconds)
NOTE:
If Car Jack Mode goes into full alarm mode, the system will ignore the
remote transmitters and this may result in the transmitter needing to be
reprogrammed.
Only program this feature if it specifically requested by the customer.
Ensure that user is fully trained on the operation of this feature. When car
jack mode is activated the system will no longer respond to the remote
transmitters.
*If the starter disable feature was installed the vehicle will not start.
When the Car Jack Mode is activated the system will start flashing the LED
rapidly for five seconds. The park lights and siren will then activate once every
second for 10 seconds in Countdown Mode. After 10 seconds the alarm will
trigger into Full Alarm, the system will no longer respond to the transmitters and
the starter disable output will activate to disable the vehicle from starting.
