Ultra motor A2B Metro, Service Manual

Page: 41 / 48

7-1
Some types of connectors are used more
than once. When disconnecting any con-
nector, label the connector halves so they
can be easily identified for assembly.
Identifying a connector half that has not
been labeled can be very time consum-
ing.
F. Key switch connector
G. Throttle connector (4-pin)
H. State-of-charge connector (3-pin)
I. Grommet
CONNECTOR IDENTIFICATION
Figure 1 identifies the connectors found
within the battery compartment, which is
inside frame downtube. Remove the bat-
tery cap to access these connectors.
A. Brake switch connector
B. Main battery connector (A battery)
C. Auxilliary battery connector (B battery)
D. Charger port connector (main battery)
E. Switch module
Chapter Seven
ELECTRICAL
FIG. 1
A
I
B
C
A
H
G
F
E
D