Ultra motor A2B Metro, Service Manual

Page: 27 / 48

4-5
SHIFTER and DERAILLEUR
(clockwise) of the stop tab on the derail-
leur hanger.
4. Turn the mounting bolt into the hanger.
Finger-tighten the bolt.
5. Rotate the derailleur counterclockwise
until the derailleur stop tab presses against
the stop tab on the hanger.
6. Torque the derailleur mounting bolt (D,
Figure 2 ) to the specification in Table 5.
Derailleur Installation
1. Lubricate the derailleur as described
above.
2. Align the mounting bolt (D,
Figure 2 ) with
the hole in the hanger.
3. Rotate the derailleur clockwise so the
stop tab on the derailleur mounting plate
(or the end of the B-screw) sits forward