Ultimaker Original, Assembly Instructions Manual

Page: 83 / 109

Step 5: assemble the filament holder Assembling the material feeder
83
image 111: attaching the clamp assembly with U-Bracket and lever on the main body
of the drive mechanism
6.5.5. Step 5: assemble the filament holder
The following parts are needed in this step.
Letter Description Qnty. Letter Description Qnty.
A
wooden parts 11B 2
B
wooden parts 11C 4
4 x
2 x
image 112: parts needed for this step
To assemble the filament holder, perform the following actions.
1. Position two wooden parts 11B next to each other.
2. Push the four wooden parts 11C in the slots of the two wooden parts
11B, see image 113.
A
B