Ultimaker Original, Assembly Instructions Manual, Page: 24 / 109

Step 5: Assembling the ‘cube’-shaped frame Assembling the frame
24
image 18: attaching the BACK, TOP, BOTTOM and FRONT panel
(for action 6-8 see image 19)
6. Place a SHORT cable duct on the RIGHT side of the BACK panel.
7. Fold the SHORT cable duct.
8. Tape the folded SHORT cable duct (to keep it folded).
5
Notice: make sure the blue Scotch tape can be removed easily.
image 19: attaching and folding the SHORT cable duct
(for action 9-14 see image 20)
9. Place a LONG cable duct on the RIGHT side of the FRONT panel.
10. Fold the LONG cable duct.
11. Tape the folded LONG cable duct (to keep it folded).
5
Notice: make sure the blue Scotch tape can be removed easily.
12. Place the RIGHT panel.
13. Attach the RIGHT panel.
Use twelve bolts M3 x 16mm and twelve hex nuts 3mm.
14. Remove the blue Scotch tape.