Ultimaker Original, Assembly Instructions Manual

Page: 66 / 109

Step 4: finishing the Z stage assembly Assembling the Z stage
66
6.4.4. Step 4: finishing the Z stage assembly
The following parts are needed in this step.
Letter Description Qnty. Letter Description Qnty.
A
LEFT arm 1
D
hex nuts 3mm 20
B
drive nut assembly 1
E
wooden panel with
adjustable level screws
1
C
RIGHT arm 1
F
bolts M3 x 30mm 20
20 x 20 x
image 84: parts needed for this step
To finish the Z stage assembly, perform the following actions (for action 1-3 see
image 85).
1. Put six hex nuts 3mm in the slots of the drive nut assembly,
2. Move the drive nut assembly in the RIGHT arm.
3. Bolt the parts together.
Tip : bolt crosswise.
5
Notice: bolt tight.
A
D
F
B C
E