97
Now that all the cables have been connected, you will place a cover over the electronics to protect the main board.
1. Take the four M3x20 bolts and put a spacer 8 mm over each bolt. Fig. 271.
2. Screw the four bolts into the main board’s threaded spacers, but only two turns. Fig. 272.
3. Place the wooden electronics cover over the four bolts with the text facing towards you. Fig. 273.
4. Slide the cover sideways until the bolts fit into the narrow part of the holes. Fig. 274.
5. Tighten the four bolts to secure the electronics cover in place. Fig. 275.
272
271
274
273
275