21
2. CABLE DUCTS
Before adding the right and left panel you will place the cable ducts. These keep the motor and limit switch wires out of
the way for safety reasons.
Right side
1. Put the frame on its left side.
2. Place a short cable duct on the right side of the back panel. Fig. 17.
3. Fold the short cable duct. Fig. 18.
4. Place a small piece of tape on the cable duct to keep it folded. Make sure the tape will not get stuck between the
panels so it can be removed easily later. Fig. 19.
5. Place the right panel. Fig. 20.
6. Loosely secure the right panel with twelve M3x16 bolts and twelve hex nuts. Fig. 21.
18
17
20
19
21
