75
To assemble the feeder clamp, perform the following steps:
1. Place the small ball bearing into the hole in the black wheel. Fig. 198.
Use a redundant piece of wood to fit the bearing in place.
2. Insert four M3x16 bolts through the flat side of side plate A. Fig. 199.
3. Place the mounting plate over the four bolts and put a hex nut in the T-slot. Fig. 200 and 201.
4. Lastly, place side plate B over the four bolts and secure with four lock nuts. Fig. 202 and 203.
199
198
201
200
203
202