Uconnect 10.1 inch Display, Instruction Manual

Page: 58 / 178

UCONNECT MODES 57
The Uconnect Phone is fully integrated with the
vehicle's audio system. The volume can be
adjusted either from the radio volume control
knob or from the right switch on the rear side of
the steering wheel.
VR “Wake Up” Words (Voice Recognition
Activation Word) — If Equipped
The Voice recognition “Wake Up” word can be
used to activate your Uconnect Voice
Recognition system without pressing a button.
To begin, say the programmed activation word:
either “Uconnect” or the brand name of the
vehicle (i.e., Dodge or Chrysler).
As an example, say “Hey Uconnect, call Bill
Smith”. The system will then dial the contact
without the need to press any buttons.
D
EVICE
M
ANAGER
A
ND
P
HONE
S
ETUP
Accessing The Device Manager
The Device Manager provides an easy way to
add new devices/smartphones, change device/
smartphone settings, and activate Do Not
Disturb.
To access the Device Manger:
1. Press the Phone button in the Bottom
Menu Bar.
2. Press “Device Manager”.
The Device Manager will list all the available
devices that have previously been paired and
connected to the system. To add a new device,
press the Add Device button.
A connected device will highlight and display the
words “Connected” underneath the device
name. If the device is a “favorite”, a star will be
displayed to the left of the device name. On a
connected device, you can choose to allow
certain functions on a device. Press on Phone or
Music Note icon to adjusted these functions:

When neither icon is highlighted: the device
will disconnect from the system.

When the Phone icon is highlighted: the
system will allow the phone to answer and
place calls.

When the Music Note icon is highlighted: the
device will be able to play audio through
Bluetooth® connection.

When both the Phone icon and Music Note
icon are highlighted: the device will have full
functionality and can answer/place calls as
well as stream audio.
Apple CarPlay® and Android Auto™ can also be
allowed/deactivated from the Device Manager.
Press the corresponding icon next to the device
name to allow access to Apple CarPlay® or
Android Auto™.
Pair A Device
Use this QR code to access your
digital experience.
To begin using Bluetooth® functionality and
Uconnect Phone, you must pair your compatible
Bluetooth®-enabled device.
2
21_00_U52_EN_USC_t.book Page 57