Uconnect 10.1 inch Display, Instruction Manual

Page: 19 / 178

18 UCONNECT INTRODUCTION
3. The Profile will be deleted. All settings and
features saved to that profile will be lost.
Profile Delete Button In Edit Profile
Profile Delete Button In Edit Profile
NOTE:
After a Profile is deleted, a pop-up will display,
indicating that the active Profile has been
removed, and will give the option to undo the
deletion. Press the Undo button to stop the
deletion. This pop-up will close in five seconds.
V
ALET
M
ODE
Valet Mode will lock out all Driver Profiles and
on certain vehicles, limit performance.
Valet Mode
Valet Mode
Press the Valet Mode button in the All Profiles
menu in the bottom left corner of the
touchscreen. A pop-up will display asking if you
would like to enter Valet Mode. Press “Yes” to
enter or “Cancel” to return to the All Profiles
menus.
If “Yes” is selected and this is the first time you
have entered Valet Mode, the Uconnect system
will prompt you to enter a Valet Mode Activation
PIN. This four-digit PIN is required to activate
and deactivate Valet Mode. Once the PIN has
been entered, press the Go button; the vehicle
will enter Valet Mode.
A “locked” symbol will appear over the Driver
Profile icon in the Upper Status Bar.
21_00_U52_EN_USC_t.book Page 18