Uconnect 10.1 inch Display, Instruction Manual

Page: 20 / 178

UCONNECT INTRODUCTION 19
Exiting Valet Mode
Exit Valet Mode
Exit Valet Mode
When the vehicle is started or was previously
placed in Valet Mode, a pop-up will display that
the vehicle is in Valet Mode. Select “Yes” to
deactivate valet mode. Alternatively, press the
Locked Profile icon in the Upper Status Bar to
exit Valet Mode.
Enter your four-digit Valet Mode PIN and press
“Go”. Valet Mode will be deactivated. The
Uconnect system will load the last active profile
before the vehicle was placed in Valet Mode.
Valet Mode PIN
Valet Mode PIN
NOTE:

Valet Mode cannot be activated or deacti -
vated while the vehicle is in motion.

For activation and deactivation, you will have
10 attempts to enter your four-digit PIN. After
10 attempts, the Uconnect system will cancel
activation/deactivation, and it will not be
available for 30 minutes.
1
21_00_U52_EN_USC_t.book Page 19