Uclear WT300, User Manual

Page: 10 / 39

10
If you have a
U CLEAR helmet communicator, you can select the
Advanced Communication Mode on your WT300 to enjoy the
special features below:
a) Walkie Talkie Mode
b) Additional way to activate PTT from the U CLEAR
headset
c) Connecting your U CLEAR headset to a cell-phone and
intercom (another U CLEAR headset) at the same time.
Advanced Communication Mode Pairing
Please make sure your UCLEAR headset and WT300 are turned
off . The stereo cable must be unplugged from the adaptor.
 Put the U CLEAR headset control unit into pairing mode by
pressing both Answer and Down buttons for 5 seconds.
* This pairing process is not in the HBC100 manual.
 With your WT300 in power off mode, press and hold the
Multi-function button for 5 seconds. It will go to pairing
mode with the U CLEAR headset.
 The status indicators of both devices will blink blue and red
simultaneously (purple color) during pairing.
 Wait till the LED indicators of both devices blink blue lights
slowly upon successful pairing.
It is recommended to restart your WT300 and U CLEAR
headset after the pairing process.
U C
LEAR
H
EADSET
[C
OMMUNICATION
M
ODE
]
Pairing