Uclear WT300, User Manual

Page: 28 / 39

28
The remote control PTT unit is already factory paired to the
WT300 adaptor. You do not need to re-do pairing for the remote
control unless it is absolutely necessary.
To pair your remote control to a new WT300 adaptor, make
sure both devices are in power-off state.
 Charge the PTT remote control. While charging, hold the
PTT button for 5 seconds until the blue and red
indicator(purple) blink simultaneously.
 Press and hold the Multi-function button on the WT300
adaptor for 5 seconds until the blue and red
indicator(purple) blink simultaneously.
 When the pairing process is completed, the purple status
indicator on both devices will go off.
 To verify if the pairing process if successful, unplug the
charging cable from the remote control unit.
 Press the PTT button once, the unit will attempt to connect
to the WT300 adaptor.
 Press the PTT button again, the status indicator on the
remote control will show solid blue.
R
EMOTE
C
ONTROL
P
AIRING