background image

 

    

32 

The  sender  will  bear  all  transportation  charges  for  functioning 
products but which were declared defective. 
 

LIMITATIONS OF WARRANTY: 

All product warranties for the product by 

U

C

LEAR

®

 are limited to 

those mentioned in the product manual.   

 
WAIVER AND DISCLAIMER: 

BITwave, FSC and all their representatives, agents, distributors, 
suppliers  and  resellers  shall  not  be  liable  and  will  be  held 
harmless  from  any  and  all  litigation,  claims,  debts,  demands, 
actions and liability which may arise, directly or indirectly, from 
operating  or  using  the  product  for  any  damages,  losses, 
distress,  pain,  suffering,  discomfort,  loss  and  injuries  including 
bodily  harm  illness,  strains,  fractures,  partial  and/or  total 
paralysis,  death  or  other  ailments  that  could  cause  serious 
disability either to any persons, or any parties whether the user 
or  other  third  parties  or  their  possessions,  or  to  any  goods, 
vehicles,  properties,  assets  among  others  including  your  own 
suffered  by  any  persons,  organizations,  or  any  third  parties 
whether physical or otherwise and which may accrue to you in 
the future, to the fullest extent permitted by law  as a result of 
the  use,  operation,  malfunctioning,  misuse,  disposal  or  repairs 
of the product or any other reasons, conditions or circumstances 
or attempts to do so whether due to negligence, omissions  or 
otherwise  of  BITwave,  FSC  or  any  of  their  representatives, 
partners,  agents,  distributors,  suppliers,  resellers,  designer, 
manufacturer  or any others  in  its supply and distribution chain 
or any third parties involved. 
All risks from operating or usage of the product rest solely and 
entirely with the user of this product, the original purchaser or 
any third parties, who assumes full responsibility for all injuries, 
losses and/ or damages, whether caused in whole or in part by 
the negligence, omissions or other  conduct  of others, including 
that  of  BITwave,  FSC  and  all  their  representatives,  partners, 

Notices 

Summary of Contents for WT300








































Reviews: