26
It is very important to calibrate your walkie talkie volume
setting to the optimum level so that you will receive the best
audio quality on the headset.
If the volume setting deviates too much from the optimum point,
you may experience the following:
a)
Volume through headset is not loud enough ;
b)
Speech is muffled and/or has hissing background noise.
To setup this tuning process, you must have the WT300 adaptor,
Bluetooth headset and walkie talkie completely set up in
listening mode. Then you will need a user talking on the other
walkie talkie of the set at the far-end.
Follow the steps below to find the optimum point of the volume
setting:
a)
Start with a low volume;
b)
Increase the volume slowly; observe the audio quality
while it gets louder.
c)
At one point, you will feel that the noise continues to
get louder but speech signal does not. Instead speech
becomes muffled and background noise is dominant.
d)
Reduce the volume slowly until speech becomes clear.
W
ALKIE
T
ALKIE
V
OLUME SETTING
During the tuning process, you should adjust the volume
control on the walkie talkie, not on the headset!
!
Summary of Contents for WT300
Page 1: ...WT300 User Manual BluetoothCommunicationAdapter...
Page 38: ...38 Notices NCC Warning...
Page 39: ...39...
