Uclear WT300, User Manual

Page: 14 / 39

14
WT300 Adaptor Button Configuration
Command Action
Power on Press/hold Multi-function for 2 seconds
Power off Press and hold Multi-function for 5 seconds
Pairing Device should be switched off;
Press and hold
Multi-function for 5 seconds
Connect to
U CLEAR
headset
Press Multi-function once
Reset Press Reset once
WT300 Adaptor Status Indicator
State Sequence
Idle Blink blue slowly
Busy Blink blue quickly
Power down Blink red 5 times
Pairing Blink blue & red simultaneously (purple)
Not connected Blink blue slowly
Connected Blink blue twice every 2 seconds
PTT activated Solid red
Low Battery Blink red 3 times every 3 seconds
Battery Charging Solid red
Battery full Solid blue
U C
LEAR
H
EADSET
[C
OMMUNICATION
M
ODE
]
MMI Table