Uclear WT300, User Manual

Page: 19 / 39

19
Step 3: Link the WT300 adaptor to the Bluetooth headset
If the Bluetooth headset is on , press the Multi-function
button of the WT300 adaptor to connect it to the headset. The
WT300 indicator will blink blue fast.
If the Bluetooth headset is off , turn it on. The headset will
autoconnect to the WT300 adaptor (switched on). Please refer
to your headset manual for detail.
 The indicator on WT300 adaptor will blink blue in 2 second
intervals if a Bluetooth link is established.
 Press the PTT button again, the indicator on WT300 adaptor
will turn red while the remote control will turn solid blue.
Other Features
The WT300 will auto power down automatically in 60 minutes if
it losses connection with the headset.
PTT from Remote Control
 Press and hold the PTT button on the remote control to start
talking. User will hear a beep tone on the headset if devices
are connected.
 Release the PTT button to be in listening mode or to end
conversation.
 During PTT operation, the indicator of the remote control
shows a blue light while the WT300 shows a red light.
B
LUETOOTH
H
EADSET
[HFP M
ODE
]
Quick Setup