Uclear WT300, User Manual

Page: 7 / 39

7
Before using PTT Remote control,
please charge it first!
Charging
o
Please use the micro-USB charging cable to connect the
device to a USB port.
o
While charging, the LED status indicator will show solid red.
o
When fully charged, the indicator light will go off.
Low Battery Indicator
o
When the LED indicator blinks red 3 times at 3-second
interval, the PTT remote control needs to be charged.
o
You will also hear 4 beep tones at 1 minute intervals in your
headset if you are connected.
Power On/Off
o
It is not necessary to Power On/Off the PTT remote control.
Connecting to the Bluetooth Adaptor
o
Pressing the PTT button once will connect the remote control
to the Bluetooth adaptor if the link has not been established.
o
The indicator will blink blue rapidly while busy making a
connection.
o
If the link with the WT300 adaptor is established, the status
indicator will show solid blue when the PTT button is pressed.
Using PTT
o
Press and hold PTT button to talk.
Reset
o
Upon charging, the device will be reset
Walkie-talkie Cables
Charging Socket
PTT Button
O
VERVIEW
PTT Remote Control at A Glance
LED Indicator