Uclear WT300, User Manual

Page: 20 / 39

20
Voice Command PTT (VOX)
The WT300 adaptor is capable of actuating the
PTT button
through voice activation
 Press the Multi-function button on the WT300 adaptor
quickly 3 times.
 You should hear a beep tone indicating VOX is enabled.
 To talk, say ‘Hello’ loudly to trigger the PTT. The status
indicator on the WT300 will show a red light during talk.
 Being silent for 2 seconds will switch to the listening mode.
 To disable this feature, press the Multi-function button 3
times again.

PTT command from the remote control will not work while
voice command PTT (VOX) is activated.
!
Upon power up, PTT from remote control is the default.
!
B
LUETOOTH
H
EADSET
[HFP M
ODE
]
Quick Setup
Some walkie-talkies have built-in VOX capability, so if
you enable the VOX of WT300, please make sure you
turn off the VOX feature on your walkie-talkie instead.
!