AeroCut Velocity OPERATION MANUAL
40
13.
Servo error
Servo motor error detected. Turn off the
power, and turn it on again after 5
seconds or longer.
14.
Paper size error
Correct the paper size to fit in the value
range below.
15.
Final cutting measurement error
Correct the final cutting measurement to
exceed the value specified below.
16.
Back margin warning
When the trailing edge is 1.000” or
longer, it may cause troubles.
17.
Leading edge margin and cut mark
margin warning
Correct the measurement so that the
leading margin becomes larger than the
cut mark margin.
18.
Cutting measurement error
Correct the cutting measurement to fit in
the value range below.
The maximum value is subject to
change depending on the entered paper
size.
19.
Crease front margin error
Correct the crease front margin to
exceed the value specified below.
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
