AeroCut Velocity OPERATION MANUAL
39
6.
Cut Paper Jammed error 1
Paper remains inside the machine.
Remove the paper.
7.
Cut Paper Jammed error 2
Paper remains inside the machine.
Remove the paper.
8.
Overload error 1
Cutting or creasing did not complete
within a set time period.
Remove the paper remaining inside the
machine.
9.
Overload error 2
An overloading error occurred at the
feed table.
Check the feed table.
10.
Overload error 3
An overloading error occurred at the
slitter.
Check the blinking slitter.
11.
Update message
This error message appears as a
warning when proceeding to another
screen without saving the corrected
dimensions in the MANU SET or FLEX
MODE screen. Press OK if you want to
proceed to the other screen; otherwise,
press RETURN.
12.
Communication error
Communication with the touch panel is
not possible.
Turn off the power, and turn it on again
after 5 seconds or longer.
