AeroCut Velocity OPERATION MANUAL
33
5.3 Skew
adjustment
・
If print is skew on the sheet, the angle of the
side guide can be adjusted.
・
The angle of the side guide changes as the
skew adjustment dial is turned.
Set the sheets again.
Skew adjustment
dial
Side guide
5.4 Creaser
adjustment
・
Turn the lever shown in the drawing below to adjust the crease depth.
Deep
Shallow
Lever
・
If creasing pressure is not enough even the lever is adjusted, pressing
・・・・・
button on MANUAL/SPEED screen and changing creasing mode to
・・・・・
may
help.
・・・・・
mode enables the machine to cycle the creaser twice at creasing
positions, which results in deeper creases.
Manual speed screen
Note.
Use less than 3 in case of creasing on heavier paper than 300 gsm to avoid paper jam.
