AeroCut Velocity OPERATION MANUAL
28
4.2 How to adjust the Y-perforation location
①
When using the perforator, the screen will display where to fix the perforator, as shown
below.
②
If the upper blades are positioned to come into contact with the lower blades, the upper
blade position can be adjusted with the perforator attached to the main body.
③
Loosen the clamp levers, move the perforator to the desired position based on the scale,
and tighten the clamp levers firmly.
Perforator lock lever
Scale
Clamp lever
Upper Blade
④
If the upper blades are not positioned to come into contact with the lower blades,
remove the perforator from the main body for adjustment.
⑤
Loosen the two knurled head screws to remove the perforator cartridge cover.
⑥
Loosen the clamp levers, move the perforator to the desired position based on the scale,
and tighten the clamp levers firmly.
⑦
Then, loosen screws with an accessory wrench and adjust the lower blade position to
near the center of the upper blades.
Perforator lock lever
Upper Blade
Knurled head screw
Perforator cartridge cover
Hexagonal Wrench
Lower Blade
