SARA-R4/N4 series - AT Commands Manual
UBX-17003787 - R09
7 Network service
Page 59 of 307
7.14 Set MNO pUMNOPROF
+UMNOPROF
SARA-R410M-02B SARA-R410M-52B SARA-R412M
Modules
SARA-N4
Syntax
PIN required
Settings saved Can be aborted
Response time Error reference
Attributes
full
Yes
No
-
7.14.1 Description
Automatically configures the module to be compliant to the requirements of various Mobile Network
Operators.
Follow this procedure to properly set up the configuration:
• Deregister the module from the network (
cycle)
• Issue AT+UMNOPROF=<MNO>
• Reboot the module (
) in order to apply the new configuration
After setting a new configuration the module reconfigures the PDP context settings (e.g. APN of the initial
EPS bearer).
u-blox cellular modules are certified according to all the capabilities and options stated in the Protocol
Implementation Conformance Statement document (PICS) of the module. The PICS, according to 3GPP
TS 51.010-2 [
], 3GPP TS 34.121-2 [
], 3GPP TS 36.521-2 [
] and 3GPP TS 36.523-2 [
], is a statement
of the implemented and supported capabilities and options of a device. If the user changes the command
settings during the certification process, the PICS of the application device integrating a u-blox cellular
module must be changed accordingly.
7.14.2 Syntax
Type
Syntax
Response
Example
Set
AT+UMNOPROF=<MNO>
OK
AT+UMNOPROF=1
OK
Read
AT+UMNOPROF?
+UMNOPROF: <MNO>
OK
+UMNOPROF: 3
OK
Test
AT+UMNOPROF=?
+UMNOPROF: (list of supported
<mode>s)
OK
+UMNOPROF:
0: SW default
1: SIM ICCID select
2: ATT
6: CT
4: Telstra
5: TMO
3: Verizon
OK
7.14.3 Defined values
Parameter
Type
Description
<MNO>
Number
Mobile Network Operator (MNO) configuration:
•
0 (default value): SW default
•
1: SIM ICCID select
•
2: ATT
•
3: Verizon
•
4: Telstra
•
5: TMO
•
6: CT
