SARA-R4/N4 series - AT Commands Manual
UBX-17003787 - R09
13 Packet switched data services
Page 125 of 307
Parameter
Type
Description
o
0 (factory-programmed value): subscribed
o
1: class 1
o
2: class 2
o
3: class 3
o
4: best effort
•
12: QoS reliability - the <param_val> parameter selects the reliability class:
o
0 (factory-programmed value): subscribed
o
1: class 1 (Interpreted as class 2)
o
2: class 2 (GTP Unack, LLC Ack and Protected, RLC Ack)
o
3: class 3 (GTP Unack, LLC Unack and Protected, RLC Ack)
o
4: class 4 (GTP Unack, LLC Unack and Protected, RLC Unack)
o
5: class 5 (GTP Unack, LLC Unack and Unprotected, RLC Unack)
o
6: class 6 (Interpreted as class 3)
•
13: QoS peak rate - the <param_val> parameter selects the peak throughput in
range 0-9. The factory-programmed value is 0.
•
14: QoS mean rate - the <param_val> parameter selects the mean throughput in
range 0-18, 31. The factory-programmed value is 0.
•
15: minimum QoS precedence - the <param_val> parameter selects the acceptable
value for the precedence class:
o
0 (factory-programmed value): subscribed
o
1: high
o
2: normal
o
3: low
•
16: minimum QoS delay - the <param_val> parameter selects the acceptable value
for the delay class:
o
0 (factory-programmed value): subscribed
o
1: class 1
o
2: class 2
o
3: class 3
o
4: best effort
•
17: minimum QoS reliability - the <param_val> parameter selects the minimum
acceptable value for the reliability class:
o
0 (factory-programmed value): subscribed
o
1: class 1 (Interpreted as class 2)
o
2: class 2 (GTP Unack, LLC Ack and Protected, RLC Ack)
o
3: class 3 (GTP Unack, LLC Unack and Protected, RLC Ack)
o
4: class 4 (GTP Unack, LLC Unack and Protected, RLC Unack)
o
5: class 5 (GTP Unack, LLC Unack and Unprotected, RLC Unack)
o
6: class 6 (Interpreted as class 3)
•
18: minimum QoS peak rate - the <param_val> parameter selects the acceptable
value for the peak throughput in range 0-9. The factory-programmed value is 0.
•
19: minimum QoS mean rate - the <param_val> parameter selects the acceptable
value for the mean throughput in range 0-18, 31. The factory-programmed value is 0.
•
20: 3G QoS delivery order - the <param_val> parameter selects the acceptable value
for the delivery order:
o
0 (factory-programmed value): subscribed
o
1: enable
o
2: disable
•
21: 3G QoS erroneous SDU delivery - the <param_val> parameter selects the
acceptable value for the erroneous SDU delivery:
o
0 (factory-programmed value): subscribed
o
1: no detection
o
2: enable
o
3: disable
•
22: 3G QoS extended guaranteed downlink bit rate - <param_val> is the value for the
extended guaranteed downlink bit rate in kb/s. The factory-programmed value is 0.
•
23: 3G QoS extended maximum downlink bit rate - <param_val> is the value for the
extended maximum downlink bit rate in kb/s. The factory-programmed value is 0.
