7. Set up the operating parameters—Activate the pushbutton
SP/XX/IG/12/E/980228
7-4
Pushbutton models
Activation—Standard pushbutton models
Only supported by ScanPlus models with part numbers 0-xxxxxx-2x-xx.
0
0
Do not use this code with ScanPlus models that do not have a pushbutton.
Standard Pushbutton
Active For Read Duration (2 s)—Standby After Good Read
Activation—Standard pushbutton models—Aiming beam
Only supported by ScanPlus ER / XP / PDF models with part numbers 0-xxxxxx-2x-xx.
0
0
Do not use this code with ScanPlus models that do not have a pushbutton.
Standard Pushbutton—Aiming Beam
Active For Read Duration (2 s)—Standby After Good Read
Activation—Energy saver pushbutton models
Only supported by ScanPlus models with part numbers 0-xxxxxx-1x-xx.
0
0
Do not use this code with ScanPlus models that do not have a pushbutton.
Energy Saver
Active For Read Duration (2 s)—Standby After Good Read
Summary of Contents for ScanPlus 1800
